HOMEAbout usNewsProductLaboratory ConstructServiceJoinContact us

Products

Telephone:0731-83889629

Fax:0731-88863596

E-mail:410013

Address:3F/8, No. 627 Lugu Road , LongSea Group, Changsha High-tech Zone, Changsha,410000, China

Products > Automatic Aniline Point Tester Petroleum Products> Portable Dissolved Oxygen MeterPortable Dissolved Oxygen Meter

  • Automatic Aniline Point Tester
Product name: Automatic Aniline Point Tester
Product Model:FDW-0271
Company:set
Stock:in stock

Purchase quantity: The minimum quantity of an order:1    Buy

Label:ASTM D611, Aniline Point
Scope of application

    Aniline point to the performance characteristics of pure hydrocarbons and hydrocarbon mixtures for display in the 

aromatics content. Equal volumes of aniline and the sample or sample plus n-heptane, and heated and stirred at a controlled 

rate. After two complementary homogeneous, the mixture was cooled at a controlled rate, the two-phase separation 

temperature and then mixed aniline point is the aniline point or sample.


Function characteristics

1, the use of thin-film technology improvements (ASTM D611 Method E) for automatic determination of aniline point and mixed aniline point. 

2, the specimen - a mixture of aniline platinum immersion heater direct heating, while aniline point photoelectric detection. 

3, the temperature is displayed on the LED display 

4, the internal pressure regulator and solenoid valves allow the use of cooling air circulation for rapid cooling or temperature measurement aniline point, aniline point lower than or close to freezing can be used to cool the air 0 ° C (32 ° F) when to Determination. 

5, equipped with a heater control variable, a light source and a stirrer. The outer surface of the casing having a layer of chemical resistant polyurethane enamel paint. 

6, the automatic sampling system - provided for non-manual operation of the aniline point measured to prevent operator exposure to aniline, n-heptane, and the test sample. 

7, the precise amount of the test component is automatically added to the mixing chamber, followed by the completion of the test, the test mixture was transferred to a waste container and the mixing chamber with a solvent wash.

Technical parameters

1, meets the following specifications: ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601; NF M 07-021 

2, the test range: 0 - 150 ° C (32 to 302 ° F) 

3, Temperature display: 0-999.9 ° C 

4, sample range applies to the: light to dark samples 

5, digital temperature display 

6, Power: 115V, 50/60Hz, single phase, 0.4A; 220-240V, 50/60Hz, single phase, 0.2A 

7, dimensions lxwxh (cm): 37x22x53 

8, Weight: 14.7kg 

9, Shipping Weight: 21kg

Related products

Automatic An

BuyFDW-0271



2010 Flanders all rights reserved. The preparation of 10013861, ICP | Conctact us | Disclaimer and privacy policy

Ice Bin
+86-18874136820
188 74136 820
Keira Li
+86-15874141041
158 74141 041
Jennifer Liu
+86-18874242528
188 74242 528